Aluminum Kennels All partitions of kennels shall either be anchored securely to the floor and where feasible, anchored to existing room walls or free standing, requiring no anchors for walls or floors (if supplied with back panels).
	Optional 1/4" thick colored high-density polyethylene panels in place of aluminum sheet are available.
	Blue	Jade	Hunter Green
Side Panels The lower 48" of the panel shall be solid construction and the upper portion shall be rod type.  a special adjustable vinyl seal mechanism shall be attached to lower frame to prevent cross-contamination of urine and feces.
Swing Gate Gates shall be framed with 1 1/4" square aluminum tubes and enclosed with 3/8" rods on 1 1/2" centers.  All gates shall be hinged by the pivotal method.  The door latch shall be of 300 series stainless steel with provisions for locking.
Back Panels Basic framing member shall be 1 1/4" 6063-T6 single grooved aluminum tube.
Resting Bench Basic framing member shall be 1 1/4" square aluminum grooved tube  of 6063-T6 alloy.  All aluminum frame legs shall be plugged with polyethylene to protect facility floors and prevent vermin from entering tubes. The resting surface is 1/4" tick high density polyethylene inserted into the groove tube framing.

Click here to request information.

 

[ Home ] [ Up ]